Rear
axle 1502 - 2002 turbo
|
|
Lower spring rubber for rear axle (you need 2 for each car) |
each 11,95 EUR |
|
Upper spring rubber for rear axle - 37 mm thick / 3 points (you need 2 for each car) |
each 11,95 EUR |
|
Top mounting rubber for rear shock absorber (you need 2 for each car) |
each 11,50 EUR |
|
Lateral stabilizer support complete for all models with stabilizer (anti roll-bar) (you need 2 for the rear axle) - included in the stabilizer mounting kit | 15,95 EUR |
|
Mounting kit for rear stabilizer (anti roll-bar) (diameter 16 mm) complete with all rubbers and assembly hardware for all models with rear stabilizer (you need 1 for the rear axle) | 57,50 EUR |
|
Gasket set for long neck final drive unit for all models up to 1968 | 50,10 EUR |
|
Gasket set for short neck final drive unit for all models from 1968 up | 45,00 EUR |
|
Bearing set for short neck final drive unit for all models from 1968 up | 99,00 EUR |
|
Wheel nut - full chrome version for alloy wheels | 1,85 EUR |
|
Wheel nut - full chrome version for steel wheels | 1,80 EUR |
|
Rear wheel bearing kit 1502 - 2002 tii each wheel (Catalog-No. 33/20/11) | 29,00 EUR |
|
Rear shock absorber - standard set up - (Catalog-No. 33/22/6) | 65,00 EUR |
|
 Rear shock absorber gas pressure „Bilstein“ (Catalog-No. 33/22/6) |
104,00 EUR |
|
Rear suspension coil spring (standard) (Catalog-No. 33/21/3) | 63,00 EUR |
|
Rear suspension coil spring (reinforced, harder) (Catalog-No. 33/21/3) | 71,00 EUR |
|
Rubber support for rear axle left or right for all models up to 8/1973 - you can take it also for later years of manufacturing (Catalog-No. 33/18/9) (you need 2 for each car) | each 32,10 EUR |
|
Flange block for rear axle suspension arm - standard (Catalog-No. 33/19/3) (you need 4 for each car) | each 9,50 EUR |
|
Flange block for rear axle suspension arm - motorsport eccentric version (Catalog-No. 33/19/3) (you need 4 for each car) |
each 16,50 EUR |
|
Repair kit for drive shaft (Catalog-No. 33/16/8) (you need 4 for each car) |
each kit 29,00 EUR |
|
Set of screws and nuts for both drive shafts inner and outer side - for inner and outer flanges without threaded holes (you need 1 set for 1 car) |
each
kit 35,00 EUR |
|
Set of screws and nuts for both drive shafts inner and outer side - for inner and outer flanges with threaded holes (you need 1 set for 1 car) |
each
kit 29,90 EUR |
All parts are NEW. All prices are unit prices and include VAT and packing, exclude postage.
|
We accept |
 |
How to order?