129,00 EUR
Engine
parts
518 - M535i (E12)
|
| 518, 520/4, 520i (E12) | 520/6 (E12) |
| 525, 528, 528i, M535i (E12) |
|
|
Engine gasket set complete (incl. all gaskets) (please order head bolts also) | 125,00 EUR |
|
|
Gasket set cylinder head (incl. valve stem seal) (please order head bolts also) | 95,00 EUR |
|
|
Gasket set for crankshaft housing | 47,50 EUR |
|
|
Plug set for crankshaft housing (set of 7) | 14,00 EUR |
|
|
Oil seal ring for crankshaft front | 7,00 EUR |
|
|
Oil seal ring for crankshaft rear | 16,00 EUR |
|
|
Head gasket (standard) (please order head bolts also) | 39,00 EUR |
|
|
Head gasket reinforced for high-performance and motor sport only for 520/4 + 520i (please order head bolts also) | 65,00 EUR |
|
|
Head bolts (set of 10) (Attention: Use new head bolts to get the specified torque setting correctly) | 26,00 EUR |
|
|
Valve cover gasket | 11,50 EUR |
|
|
Valve stem seal up to 10/1978 (you need 8x for each car) | 2,75 EUR |
|
|
Valve stem seal from 10/1978 up (you need 8x for each car) | 2,20 EUR |
|
|
Intake manifold gasket (single) (you need 3x for each car) | 1,60 EUR |
|
|
Intake manifold gasket (double) (you need 1x for each car) | 1,60 EUR |
|
|
Exhaust manifold gasket (you need 4x for each car) | 3,60 EUR |
|
|
Oil pan gasket - original paper gasket | 11,00 EUR |
|
|
Rocker shaft intake side | 29,00 EUR |
|
|
Rocker shaft exhaust side | 29,00 EUR |
|
|
Rocker arm (you need 8x for each car) | 19,50 EUR |
|
|
Mounting kit for rocker arm - rocker shaft, complete for 1 engine (without rocker arms and rocker shafts) | 39,00 EUR |
|
|
Camshaft (standard) up to 9/1980 | 209,00 EUR |
|
|
Camshaft (standard) from 9/1980 up | 259,00 EUR |
|
|
Repair kit for chain tensioner complete | 11,00 EUR |
|
|
Piston for chain tensioner | 8,00 EUR |
|
|
Timing chain (double) up to 11/1978 | 39,50 EUR |
|
|
Timing chain (single) from 11/1978 up | 27,00 EUR |
|
|
Camshaft sprocket (single) from 11/1978 up | 25,00 EUR |
|
|
Crankshaft sprocket (single) from 11/1978 up | 36,00 EUR |
|
|
Chain guide | 5,95 EUR |
|
|
Chain tensioning guide | 25,00 EUR |
|
|
Intake valve (Ø 42 mm) for 518 up to chassis no. 4640828 | 19,90 EUR |
|
|
Intake valve (Ø 46 mm) for 518 from chassis no. 4640828 up and all 520/4, 520i | 29,70 EUR |
|
|
Exhaust valve (Ø 35 mm) for 518 up to chassis no. 4640828 | 35,00 EUR |
|
|
Exhaust valve (Ø 38 mm) for 518 from chassis no. 4640828 up and all 520/4, 520i | 38,50 EUR |
|
|
Piston ring set (set for one piston, standard) for 518, 520/4, 520i | 36,50 EUR |
|
|
Piston ring set (set for one piston, +0,25 or +0,5) for 518, 520/4, 520i | 37,35 EUR |
|
|
Piston incl. piston rings for 520i from 7/1975 up (size 89,22 + 0,25 1th oversize) |
each 129,00 EUR |
|
|
Connecting rod bearing shell set (standard or +0,25 or +0,5) | 54,00 EUR |
|
|
Connecting rod bearing shell set (+0,75 or +1,0) | 58,00 EUR |
|
|
Main bearing shell set (standard or +0,25 or +0,5) | 120,00 EUR |
|
|
Main bearing shell set (+0,75 or +1,0) | 130,00 EUR |
|
|
Oil pump chain | 13,00 EUR |
|
|
Oil pump sprocket | 9,00 EUR |
|
|
Loctite screw adhesive liquid - super strong to fasten all screws of your cars | 3,75 EUR |
Motorsport engine parts for 518, 520/4, 520i
|
Schrick sport camshaft 292° for 518, 520/4, 520i up to 9/1980 | 399,00 EUR |
|
|
Schrick sport camshaft 292° for 518, 520/4, 520i from 9/1980 up | 399,00 EUR |
|
|
Schrick sport camshaft 304° for 518, 520/4, 520i up to 9/1980 | 425,00 EUR |
|
|
Schrick sport camshaft 304° for 518, 520/4, 520i from 9/1980 up | 425,00 EUR |
|
Schrick sport camshaft 316° for 518, 520/4, 520i up to 9/1980 | 460,00 EUR |
|
|
Schrick sport camshaft 316° for 518, 520/4, 520i from 9/1980 up | 460,00 EUR |
|
|
Schrick sport camshaft 328° for 518, 520/4, 520i up to 9/1980 | 480,00 EUR |
|
|
Schrick sport camshaft 336° for 518, 520/4, 520i up to 9/1980 | 480,00 EUR |
|
Schrick outer valve spring (you need 8x for each car) for all models | 13,60 EUR |
|
Schrick inner valve spring (you need 8x for each car) for all models | 13,60 EUR |
|
Schrick intake valve (Ø 48 mm) for all models | 32,00 EUR |
|
Schrick exhaust valve (Ø 39 mm) for all models | 32,00 EUR |
Please tell us your engine specifications exactly when ordering !!!
|
Engine gasket set complete (incl. all gaskets) (please order head bolts also) | 149,00 EUR |
|
Gasket set cylinder head (inkl. valve stem seal) (please order head bolts also) | 99,00 EUR |
|
Gasket set for crankshaft housing | 54,00 EUR |
|
Head gasket (please order head bolts also) | 42,50 EUR |
|
Head gasket reinforced for high-performance and motor sport (developed by ALPINA) (please order head bolts also) | 299,00 EUR |
|
Head bolts (set of 14) (Attention: Use new head bolts to get the specified torque setting correctly) | 20,00 EUR |
|
Valve cover gasket | 12,50 EUR |
|
Exhaust manifold gasket (you need 6x for each car) | 3,25 EUR |
|
Oil pan gasket | 10,50 EUR |
|
Rocker arm (you need 12x for each car) | 15,00 EUR |
|
Rocker shaft for intake and exhaust side (you need 2x for each car) | 45,00 EUR |
|
Mounting kit for rocker arm - rocker shaft, complete for 1 engine (without rocker arms and rocker shafts) | 29,00 EUR |
|
|
Camshaft (standard) | 275,00 EUR |
|
Timing belt round shape teeth | 32,00 EUR |
|
Timing belt square shape teeth | 34,00 EUR |
|
Belt tensioner | 39,90 EUR |
|
Intake valve | 19,90 EUR |
|
Exhaust valve | 36,00 EUR |
|
|
Piston ring set (set for one piston, standard) | 23,50 EUR |
|
|
Piston ring set (set for one piston, +0,5) | 23,50 EUR |
|
Connecting rod bearing shell set (standard or +0,25 or +0,5) | 66,00 EUR |
|
Main bearing shell set - standard (standard or +0,25 or +0,5) | 122,00 EUR |
|
Crankshaft incl. bearing shells | 595,00 EUR |
|
Oil pump | 109,00 EUR |
|
Engine support rubber for 520/6 up to 8/1979 | 14,00 EUR |
|
Engine support rubber for 520/6 from 8/1979 up | 15,00 EUR |
|
|
Loctite screw adhesive liquid - super strong to fasten all screws of your cars | 3,75 EUR |
Motorsport engine parts for 520/6
|
|
Schrick outer valve spring (you need 12x for each car) for all models | 13,60 EUR |
|
|
Schrick inner valve spring (you need 12x for each car) for all models | 13,60 EUR |
|
Schrick intake valve (Ø 42 mm) | 39,00 EUR |
|
Schrick exhaust valve (Ø 39 mm) | 39,00 EUR |
Please tell us your engine specifications exactly when ordering !!!
|
Engine gasket set complete for 525, 528 up to 8/1978 (please order head bolts also) | 140,00 EUR |
|
Engine gasket set complete for 525 from 8/1978 up (please order head bolts also) | 140,00 EUR |
|
Engine gasket set complete for 528i up to 8/1978 (please order head bolts also) | 185,00 EUR |
|
Engine gasket set complete for 528i from 8/1978 up (please order head bolts also) | 185,00 EUR |
|
Engine gasket set complete for M525i (please order head bolts also) | 185,00 EUR |
|
Gasket set for cylinder head complete including valve stem seals for 525, 528 up to 8/1978 (please order head bolts also) | 115,00 EUR |
|
Gasket set for cylinder head complete including valve stem seals for 525 from 8/1978 up (please order head bolts also) | 115,00 EUR |
|
Gasket set for cylinder head complete including valve stem seals for 528i up to 8/1978 (please order head bolts also) | 140,00 EUR |
|
Gasket set for cylinder head complete including valve stem seals for 528i from 8/1978 up (please order head bolts also) | 140,00 EUR |
|
Gasket set for cylinder head complete including valve stem seals for M535i (please order head bolts also) | 140,00 EUR |
|
Gasket set for crankshaft housing for 525, 528, 528i, M535i | 59,00 EUR |
|
Plug set for crankshaft housing (set of 8) for 525, 528, 528i, M535i | 16,00 EUR |
|
Head gasket for 525, 528, 528i (please order head bolts also) | 69,00 EUR |
|
Head gasket for M535i (please order head bolts also) | 75,00 EUR |
|
Head bolts (set of 14) for 525, 528, 528i, M535i (Attention: Use new head bolts to get the specified torque setting correctly.) | 36,40 EUR |
|
Valve cover gasket for 525, 528, 528i, M535i | 16,50 EUR |
|
|
Valve stem seal for 525, 528, 528i up to 8/1978 (you need 12 for 1 car) | 2,75 EUR |
|
|
Valve stem seal for 525, 528, 528i, M535i from 8/1978 up (you need 12 for 1 car) | 2,20 EUR |
|
Oil pan gasket for525, 528, 528i, M535i | 9,90 EUR |
|
|
Oil seal for crankshaft rear for 525, 528, 528i, M535i | 16,00 EUR |
|
|
Oil seal for crankshaft front for 525, 528, 528i, M535i | 13,00 EUR |
|
Intake manifold gasket for 525, 528, 528i, M535i (you need 6 for 1 car) | 3,00 EUR |
|
Exhaust manifold gasket for 525, 528, 528i, M535i (you need 6 for 1 car) | 3,25 EUR |
|
Camshaft for 525 | 280,00 EUR |
|
|
Camshaft for 528, 528i up to 8/1978 | 249,00 EUR |
|
Camshaft for 528i from 8/1978 up, M535i | 310,00 EUR |
|
|
Rocker arm (you need 12 for 1 car) for 525, 528, 528i, M535i | 19,50 EUR |
|
Rocker shaft intake side front for 525, 528, 528i, M535i | 32,00 EUR |
|
Rocker shaft intake side rear for 525, 528, 528i, M535i | 32,00 EUR |
|
Rocker shaft exhaust side front for 525, 528, 528i, M535i | 32,00 EUR |
|
Rocker shaft exhaust side rear for 525, 528, 528i, M535i | 32,00 EUR |
|
Mounting kit for rocker arm - rocker shaft complete for 1 engine (without rocker arms and rocker shafts) for 525, 528, 528i, M535i | 59,00 EUR |
|
|
Timing chain (double) for 525, 528, 528i up to 8/1978 | 39,50 EUR |
|
|
Timing chain (single) for 525, 528i, M535i from 8/1978 up | 27,00 EUR |
|
Camshaft sprocket (for single timing chain) for 525, 528i, M535i from 8/1978 up | 33,00 EUR |
|
Crankshaft sprocket (for single timing chain) for 525, 528i, M535i from 8/1978 up | 31,00 EUR |
|
|
Piston for chain tensioner for 525, 528, 528i, M535i | 8,00EUR |
|
|
Repair kit for chain tensioner for 525, 528, 528i, M535i | 11,00 EUR |
|
|
Chain guide for 525, 528, 528i, M535i | 5,95 EUR |
|
|
Chain tensioning guide for 525, 528, 528i, M535i | 25,00 EUR |
|
Intake valve (Ø 46 mm) for 525, 528, 528i, M535i | 26,00 EUR |
|
|
Exhaust valve (Ø 38 mm) for 525, 528, 528i, M535i | 43,00 EUR |
|
|
Piston ring set (standard, each piston) for 525, 528, 528i | 27,00 EUR |
|
|
Piston ring set (each piston, +0,25 or +0,5) for 525, 528, 528i | 27,30 EUR |
|
Piston ring set (each piston, dimension=93,4 mm/1,5/2,5/3,5 mm) for M535i | 39,80 EUR |
|
Connecting rod bearing shell set (standard or +0,25 or +0,5) for 525, 528, 528i, M535i | 79,00 EUR |
|
|
Connecting rod bearing shell set (standard or +0,75 or +1,0) for 525, 528, 528i, M535i | 89,00 EUR |
|
Main bearing shell set (standard or +0,25 or +0,5) for 525, 528, 528i, M535i | 149,00 EUR |
|
Crankshaft with bearing shells for 525 | 700,00 EUR |
|
Crankshaft with bearing shells for 528, 528i | 599,00 EUR |
|
Oil pump sprocket for 525, 528, 528i, M535i | 14,50 EUR |
|
|
Oil pump chain for 525, 528, 528i, M535i | 14,00 EUR |
|
Engine mounting (you need 2 for 1 car) for 525, 528, 528i, M535i | 14,00 EUR |
|
|
Loctite screw adhesive liquid - super strong to fasten all screws of your cars | 3,75 EUR |
Motorsport engine parts for 525, 528, 528i, M535i
|
|
Schrick outer valve spring (you need 12x for each car) for all models | 13,60 EUR |
|
|
Schrick inner valve spring (you need 12x for each car) for all models | 13,60 EUR |
Please tell us your engine specifications exactly when ordering !!!
All parts are NEW. All prices are unit prices and include VAT and packing, exclude postage.
|
We accept |
 |
How to order?